Extruded Free Track Conveyor System

Rapid Industries, Inc. Flow-Plus 4X4 Power & Free Extruded Free Track Conveyor System eliminates all stops and pushers at transfers because wide dog pulls trolley through the distance between transferring chains.

System Advantages:

All chain-to-chain transfers are made utilizing direct chain-to-chain contacts, eliminating all pushers, air cylinders, parasitic chains, tight bite track sections.

The front trolley transfer has the ability to accumulate through transfer zones, eliminating all stops and pushers at the transfers.

Eliminates electrically interlocked chains so production can continue on one line when the second line is down.

Trolley Benefits:

Heat treated wear surfaces and components.

Force rollers, Load and Guide Wheel easily replaced.

Force rollers to guide retractable dog.

Wide dog front trolley transfer.

Greasable Load and Guide Wheels.

Trolley is easily disasembled.

Made of quality components that are dimensionally consistant and interchangable.

Track Section Features:

Designed utilizing 4" I-Beam over two facing special extruded channels (high strength 2400 lb. loading capacity), joined together with 1/2" thick steel yokes located on 30" centers.

Special free track with additional rib extruded into lower toe sections allwoing for close tracking of the free trolley assemblies and reinforcement of the track sections.

Steel consists of Rapalloy 1035 high carbon with higher hardness rating than normal. Our hardness rating averages from 180 to 240 Brinell on the power track and on the free channels.

Capacity of the track sections utilizing extruded steel is equal to 2400 pounds loading per free trolley.

<%=company%>, 4003 Oaklawn Drive, PO Box 19259, Louisville, KY 40259-0259, Phone: 1-502-968-3645, Fax: 1-502-968-6331