Product/Service

Overhead Electric Powered Manipulator

Source: Unidex
This electrically powered, overhead manipulator is designed to provide workplace versatility by utilizing the X- and Y-axis movement offered by bridge cranes
This electrically powered, overhead manipulator is designed to provide workplace versatility by utilizing the X- and Y-axis movement offered by bridge cranes. The machine offers reach-in in flexibility for machine loading and unloading, as well as the ability to stabilize out of balance loads that can not be matched by a swinging hoist.

The machine features a 300 lb lift capacity at column centerline, a 360° arm rotation, and a round, telescoping lifting column that enables lift strokes of 60-in. or more from floor level. The manipulator also offers two-speed lifting and lowering, with a slow speed of 1.6-in./sec and a fast speed of 6.4-in./sec. Power requirements are 230 V 3-Phase.

According to the manufacturer, a variety of manual, mechanical, and powered end effectors can be attached to the manipulator arm for handling almost any load. Control options include handle mounted, arm mounted, and pendant operation.

Unidex, 2416 Main Street, PO Box 129, Warsaw, NY 14569. Tel: 716-786-3170. Fax: 716-786-3223.