Product/Service

Drum Rotator

Source: Morse Mfg. Co., Inc.
The MODEL 310 tilt-to-load drum rotator features self-tilting for easy floor level loading and corner-over-corner mixing action
The MODEL 310 tilt-to-load drum rotator features self-tilting for easy floor level loading and corner-over-corner mixing action.

Users load a drum into the rotator with the drum holder in the lowered position, and with the hinged ratchet and top clamps open. They then secure the drum into the rotator by using the cinch chain and ratchet, and by tightening the top clamps. Users raise the drum to top the position with a hydraulic powered lift. The machine can then rotate the drum with vigorous corner-over-corner mixing action.

The machine features a capacity of 800 lb (363 kg) for a full Drum, and a 400 lb capacity (181 kg) for half-full drum. Rotation speeds range from 5 to 20 rpm.

Additional specifications include:

  • Overall height with drum raised: 54-in. (137 cm)
  • Overall length with drum raised: 74-in. (188 cm)
  • Handles Drum Heights: 29- to 37-in. (74 to 94 cm)
  • Handles Drum Diameters: 18- to 23.5-in. (46 to 60 cm)

Morse Mfg. Co., Inc., 727 West Manlius St., PO Box 518-BB, East Syracuse, NY 13057. Tel: 315-437-8475. Fax: 315-437-1029.